How to Clean DPF Filter Kubota

Tractors require constant maintenance. As a part of the engine’s exhaust system, the DPF requires regular DPF cleaning to preserve its performance. To keep your powerful engine running smoothly, you should know how to clean DPF filter Kubota.

Whether it is time to clean the filter, or you are just preparing your Kubota machine for the working season, we have some expert cleaning tips for you. We will reveal your safest and most effective options for cleaning your Kubota’s DPF system.

How to Clean DPF Filter Kubota?

There are two ways how to clean a DPF filter Kubota: you can either do it by yourself or leave it to professionals. As Kubota tractor dealers, we always advise our clients to contact us when their diesel particulate filter needs cleaning.

Kubota Engine has a special program for DPF cleaning and a DPF exchange, and their cleaning method requires strict guidelines to ensure each DPF filter meets its full certification standard. 

As we said, Kubota has a special cleaning kit– the No-hassle Clean DPF Exchange Kit. The shipping kit is at no cost within the U.S. In the exchange kit, you will get a certified pre-cleaned DPF, so you experience as little downtime as possible while your DPF is sent out for cleaning.

Step-by-step process

The cleaning process at Kubota Engines of your DPF will include the following steps:

• Unpacking the DPF filter
• Inspecting the filter for any damage
• If the DPF shows no signs that it can’t be cleaned, the Kubota professionals do a pin gauge check
• Flow measurements are done to check the baseline values
• The DPF undergoes a 20-minute pneumatic cleaning process
• Another flow measurement is done
• The DPF is exposed to high heat for 24 hours
• A second round of pneumatic cleaning and air-blowing
• The third and final flow measurement is done on the DPF and 
• The gasket flanges are refinished and sealed correctly
• The DPF is repainted and ready to ship

At Wickham Tractor, you won’t only find the best Kubota tractor deals, but we can also give you an estimate of how much will a DPF cleaning cost according to your tractor model. While the cost varies, you might be interested in finding out how long does it take to clean a DPF filter.

The cleaning process of DPF filter at Kubota Engine takes approximately two days. However, what usually takes longer is the shipping. So, if you are planning on sending your DPF to Kubota Engine, plan accordingly.

If you go with this cleaning method, you can rest assured you get the filter cleaned with utmost care. Each DPF is cleaned following a multi-step inspection, and state-of-the-art equipment is used throughout the cleaning process.

DIY cleaning DPF filter

Sending your filter to Kubota Engine is the easy way to clean the DPF filter. If you want to do it the hard, and probably the less efficient way, you can try to do it yourself. So what are the steps to properly clean a DPF filter on a Kubota? 

Although we don’t recommend it, here is how to clean DPF filter Kubota at home:

• Locate the DPF filter, which is typically between the pressure sensors in the outlet section
• Remove the DPF carefully, the removal process depends on the tractor model
• Just like the professional DPF cleaners, you should inspect the DPF filter
  • Check for damages,
  • Look for blockages and clogging.
• Use high-pressure compressed air to clean any blockages and debris
• Rinse the filter off under high pressure and dry it off

Another way you can clean a DPF filter from Kubota tractors at home is by using DPF chemical cleaning solutions. If you decide to use a cleaning agent, you won’t even need to take out the DPF from the tractor. Ensure you use a high-quality agent for the diesel particulate filter.

How Often Should a DPF Filter on a Kubota Be Cleaned?

Under normal conditions, the DPF should be cleaned every 3,000 operating hours. However, it is best to check your Kubota tractor manual and see whether it recommends otherwise. One important thing is to not confuse the regular maintenance and cleaning of the DPF filter with the Kubota regeneration process.

Signs your DPF filter needs cleaning

Besides the manufacturer's recommendations, there are certain signs to be wary of. The signs indicate when your DPF needs cleaning. The most common are:

• More frequent regeneration cycles are required
• Visible exhaust fumes coming out of your exhaust
• DPF warning light on your dashboard
• Loss of engine power
• Increased fuel consumption

Reasons to Clean the DPF Filter of Your Kubota Machine

Just like every other required maintenance, the DPF cleaning of your Kubota tractor is highly important. For one, a clean DPF keeps your engine running smoothly and without any trouble. You won’t face performance issues and will prevent engine damage.

In addition, a clean filter increases the fuel economy, as it restores the normal exhaust flow. It also reduces the tractor emissions ensuring its compliance with environmental regulations.

Ultimately, regular cleaning of the filter extends its lifespan. With the cleaning process, all the contaminants that might cause damage to the filter are removed and minimize the chances of un-repairable damage. A clean DPF means no costly repairs and less downtime.

Conclusion

Every tractor owner must understand the options for how to clean DPF filter Kubota. With our practical tips we can safely say you are now informed about the importance of cleaning the DPF and know the best way to clean it. A clean filter could help your Kubota go a long way. If your tractor requires a DPF cleaning and you want professionals to do it, contact us today.